F1537 round bars are particularly suitable for endoprosthesis and osteosynthesis where high mechanical stress is expected. usually, application areas are the production of permanent surgical implants and all kinds of implants placed in the human body. It is ideal for applications in high thermal, mechanical, and corrosive stress conditions; as well as biomedical applications.

We supply  Cobalt-Chromium-Molybdenum for implants from reliable mills is the MicroMelt® Biodur®Carpenter CCM® alloy. which meets the strictest requirements regarding biocompatibility
and high corrosion resistance. This cobalt chrome alloy 1 &  alloy 2 are highly biocompatible, making them ideal for surgical implants such as knee, hip, and shoulder replacements.

ASTM F1537 Alloy 1 steel bar is domestically melted and produced by a leading global manufacturer accepted by all major medical OEMs.we are importing and stocking these F1537 grade round bars and wires from well-known brand mills from the USA, Europe, Germany, France, etc. we are never compromising with quality because we know that these products are a concern to live. any small or large quantity we handle our customer order equally and providing best products with the earliest delivery schedule.

Material Applications.
• Knee replacements
• Hip replacements
• Shoulder replacement implants
• Spinal rods, cages, and disc replacement
• Fracture fixation

ASTM F1537 Alloy Specification.
• ASTM: F1537 Alloy 1
• ASTM: F799
• ISO: 5832-4
• ISO: 5832-12

ASTM F1537 Alloy Available Forms.
Coil
• Sheet
• Strip
• Foil
Wire
• Profile (Shaped Wire)
• Round
• Flat

Chemical Composition

Any Technical Assist?

The post ASTM F1537 appeared first on All Medical Metals.

Alloy MP35N®

Co-Ni-Cr-Mo-Alloy

ASTM F562, AMS 5758, AMS 5844, AMS 5845

alloy MP35N possesses excellent corrosion resistance in harsh oil and gas environments including seawater, chloride brines, sweet gas, and sour gas. It is the highest strength alloy approved in NACE MR0175 for use in unrestricted sour service, offering an unmatched combination of strength and corrosion resistance. The unique capabilities of MP35N are derived from the alloy’s chemistry, premium melting technology, cold-working, and heat treatment.
MP35N Alloy Applications
MP35N® is extremely suitable in environments where a high combination of strength, high modulus values, and good corrosion resistance are required. Some examples of these types of applications,
Material Applications.
• wire based stents
• filters
• surgical instruments
• pacemaker
• leads and orthopedic implants
• Medical devices
• Dental products
MP35N Alloy Material Specification.
• AMS 5758
• AMS 5844
• AMS 5845
• ASTM F562
• ASTM F688
• NACE MR01-75 / ISO 15156
MP35N Alloy Available Forms.
Coil
• Sheet
• Strip
• Foil
Wire
• Profile (Shaped Wire)
• Round
• Flat

MP35N Alloy Technical Data Sheet

MP35N Alloy Typical Mechanical Properties

Any Technical Assist ?
Note :  MP35N® is a registered trademark of SPS Technologies.

The post Alloy MP35N® appeared first on All Medical Metals.

L605 / Haynes 25 Alloy is cobalt-based wrought alloy that is resistant to oxidation and carburization coupled with excellent high temperature strength. Even in the work hardened state, it is non-magnetics Haynes 25 Alloy  with very good strength up to about 1500°F (815°C) and good oxidation resistance up to about 1800°F (980°C).as we L605 alloys suppliers we provide l605solution heat treated in the range of 2150-2250°F and rapid air or water quenched to attain optimum properties. 

L605 is composed primarily of cobalt (Co), with a specified mixture of chromium (Cr), tungsten (W), nickel (Ni), iron (Fe) and carbon (C), as well as small amounts of manganese (Mn), silicon (Si), and phosphorus (P). The tungsten and nickel improve the alloy’s machinability, while chromium contributes to its solid-solution strengthening.l605 is purely cobalt based alloys.

Heat treatment:

Bars shall be solution heat treated by heating to a temperature within the range 2150 to 2250 °F, holding at the selected temperature within ±25 °F for a time commensurate with section thickness, and cooling at a rate equivalent to an air cool or faster. Hardness of bars 277 HB max.

L605 / Haynes 25 Alloy Material Applications.
• wire based stents
• filters
• surgical instruments
• pacemaker
• leads and orthopedic implants
• Medical devices
• Dental products

Haynes 25 Alloy Specifications
UNS R30605
AMS 5537 Sheet Strip and Plate
AMS 5759 Bar and Forging Stock
AMS 5796 Welding Wire
AMS 5797 (UNS W73605) Welding Rod
ASTM F90 Bar and Wire (surgical implant quality)

Haynes 25 Alloy Available Forms.
Coil
• Sheet
• Strip
• Foil
Wire
• Profile (Shaped Wire)
• Round
• Flat

Mechanical Properties

Any Technical Assist ?

The post L605 alloys appeared first on All Medical Metals.